Product Name: DIN F5 Gate Valve

Diameter: DN50-600

Pressure: PN1.0 / 1.6mpa

Temperature: 0-80 ℃

Medium: Water, gas, etc.

Body material: GGG50 / 40

Connection: Flange

Body material: DI

Seat Materials: NBR/EPDM/PTFE

Disc Materials: DI+NBR/EPDM/PTFE

Stem Materials: 45#/2Cr13/ 304/316stainless steel

 

Features:

Low torque operation
Rubber encapsulated wedge
Clockwise closing direction
Fusion bonded epoxy coated inside and outside

SKU: Resilient Seated Gate Valve 2 Category: Tag:
 

1.Introduction:

The valves disc is rubber-packed to get an excellent sealing effect by the rubber’s resilient deformation. Non-rising resilient seated gate valves solve the problem in general gate valves such as leakage, rusting, etc., and save installation space. It is used widely in the tap water industry, sewage treatment, shipping construction,

petroleum, chemicals, food, pharmacy, textile, electric power, metallurgy, and energy system’s pipeline to adjust and shut off fluids.

 

2.Parameters:

PARAMETER of DIN F5 Resilient Seated Gate Valve

 

3.Product features and advantages:

• Fluid resistance, little erosion, and corrosion occurs on the sealing surface from the media.

• Flat base seat—-Traditional gate valve used to have foreign objects such as stone, wood, cement, paper, and other debris in the notch of the valve bottom, then cause water leakage when the valve can not be close tightly. Soft seal gate valve is designed with the flat base which is in the pipe’s same level, then no more foreign objects filled in, easily to be free-flowing.

• Overall rubber coating—-Using high-quality rubber to overall coat the valve disc both inside and outside, with domestically leading rubber vulcanized technology, the valve is able to maintain accurate geometry size. What’s more, high adhesion between the rubber and valve disc makes the rubber steadily stick with good elastic memory.

• Corrosion resistance – The valve body is coated with epoxy resin powder, it can prevent the valve from corrosion and rusting, and the valve can be used in the wastewater system. Difficult to break, traditional gate valve used to cause fracture because of the hit or collision from other objects. The new valve body material is ductile iron, this material makes the fracture situation remarkably reduce.

• Three “O” ring seals- The stem with three “O” ring rings seal design can reduce friction switch, significantly reducing water leakage, besides, we can replace the valves without stopping the water construction.

• Helping to drink- Due to the internal body to non-toxic epoxy resin coating, the Inner and outer surfaces of the shutter is completely covered with rubber so it will not appear rust or corrosion, insure water available to drink.

• Body Casting-  Body using precision casting, Precise geometry make it possible to ensure the valve seal without any other finishing to the inner of the valve.

• Lightweight – Body with a ductile cast made, lighter in weight than the conventional valve about 20% to 30%, easy installation, and maintenance.

 

4.Application:

To be used as the regulating and cut off the device in the fluid pipeline of the following system:

•    Water       •     Electricity         •    Sewage            •     Medicine        •    Construction        •    Metallurgy

•    Food        •   Textile                •    Energy